Teltonika RUT241 Industrial LTE Router

Technical Description

• MOBILE
  • Mobile module: 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
  • 3GPP Release: Release 10/11 depending on the hardware version
  • Status: Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID
  • SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
  • USSD: Supports sending and reading Unstructured Supplementary Service Data messages
  • Multiple PDN: Possibility to use different PDNs for multiple network access and services
  • Band management: Band lock, Used band status display
  • APN: Auto APN
  • Bridge: Direct connection (bridge) between mobile ISP and device on LAN
  • Passthrough: Router assigns its mobile WAN IP address to another device on LAN
• WIRELESS
  • Wireless mode: IEEE 802.11b/g/n, Access Point (AP), Station (STA)
  • Wi-Fi security: WPA2-Enterprise - PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation
  • SSID/ESSID: SSID stealth mode and access control based on MAC address
  • Wi-Fi users: Up to 50 simultaneous connections
  • Wireless Connectivity: Features Fast roaming (802.11r), Relayd
  • Wireless QR: code generator Once scanned, a user will automatically enter your network without needing to input login information
• NETWORK
  • Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
  • VoIP passthrough support: H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
  • Connection monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
  • Firewall: Port forward, traffic rules, custom rules
  • Firewall status page: View all your Firewall statistics, rules, and rule counters
  • Network topology: Visual representation of your network, showing which devices are connected to which other devices
• SECURITY
  • Authentication: Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block
  • Firewall: Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
  • Attack prevention: DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
  • VLAN: Port and tag-based VLAN separation
  • Mobile quota control: Mobile data limit, customizable period, start time, warning limit, phone number
  • WEB filter: Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
  • Access control: Flexible access control of SSH, Web interface, CLI and Telnet
• VPN
  • OpenVPN: Multiple clients and a server can run simultaneously, 27 encryption methods
  • GRE: GRE tunnel, GRE tunnel over IPsec support
  • PPTP, L2TP: Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
  • Stunnel: Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
  • DMVPN: Method of building scalable IPsec VPNs
  • SSTP: SSTP client instance support
  • ZeroTier: ZeroTier VPN client support
  • WireGuard: WireGuard VPN client and server support
• PHYSICAL INTERFACES
  • Ethernet: 2 x RJ45 ports, 10/100 Mbps
  • I/O’s: 1 x Digital Input, 1 x Digital Output on 4-pin power connector
  • Status LEDs: 3 x Connection type status LEDs, 5 x Connection strength LEDs, 2 x LAN status LEDs, 1 x Power LED
  • SIM: 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V, external SIM holder
  • Power: 1 x 4-pin power connector
  • Antennas: 2 x SMA for LTE, 1 x RP-SMA for Wi-Fi antenna connectors
  • Reset: Reboot/User default reset/Factory reset button