Teltonika RUTM50 5G Router Dual SIM Wave2

Technical Description

• MOBILE
  • Mobile module: 5G Sub-6 GHz SA, NSA 2.4, 3.4Gbps DL (4x4 MIMO) 900, 550Mbps UL (2x2 MIMO); 4G (LTE): DL Cat 19 1.6Gbps (4x4 MIMO), UL Cat 18 200Mbps
  • SIM switch: 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
  • Status: Signal strength (RSSI), SINR, RSRP, RSRQ, EC, IO, RSCP Bytes sent, received, connected band, IMSI, ICCID.
  • SMS: SMS status, SMS configuration, send, read SMS via HTTP POST, GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, Call utilities
  • USSD: Supports sending and reading Unstructured Supplementary Service Data messages
  • Multiple PDN: Possibility to use different PDNs for multiple network access and services
  • Band management: Band lock, Used band status display
  • APN: Auto APN
  • Bridge: Direct connection (bridge) between mobile ISP and device on LAN
  • Passthrough: Router assigns its mobile WAN IP address to another device on LAN
• WIRELESS
  • Wireless mode: 802.11b/g/n/ac Wave 2 (Wi-Fi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO)
  • Wi-Fi security: WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation
  • ESSID: ESSID stealth mode
  • Wi-Fi users: Up to 150 simultaneous connections
  • Wireless Hotspot: Captive portal (Hotspot), internal/external Radius server, SMS authorization, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customizable themes
  • Wireless Connectivity Features: Wireless mesh (802.11s), fast roaming (802.11r), Relayd
• NETWORK
  • Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
  • VoIP passthrough support: H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
  • Connection monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
  • Firewall: Port forward, traffic rules, custom rules
  • DHCP: Static and dynamic IP allocation, DHCP Relay
• SECURITY
  • Authentication: Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block
  • Firewall: Pre-configured firewall rules can be enabled via the WebUI, unlimited firewall configuration via CLI; NAT; NAT-T
  • Attack prevention: DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
  • VLAN: Port and tag-based VLAN separation
  • Mobile quota control: Mobile data limit, customizable period, start time, warning limit, phone number
• VPN
  • OpenVPN: Multiple clients and a server can run simultaneously, 27 encryption methods
  • GRE: GRE tunnel, GRE tunnel over IPsec support
  • PPTP, L2TP: Client, Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
  • Stunnel: Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
  • DMVPN: Method of building scalable IPsec VPNs
  • SSTP: SSTP client instance support
  • ZeroTier: ZeroTier VPN client support
  • WireGuard: WireGuard VPN client and server support
  • Tinc: Tinc offers encryption, authentication and compression in it's tunnels. Client and server support
• PHYSICAL INTERFACES
  • Ethernet: 5 x RJ45 ports, 10, 100, 1000 Mbps
  • I/O’s: 1 x Digital Input, 1 x Digital Output on 4-pin power connector
  • SIM: 2 x SIM slot (Mini SIM – 2FF), 1.8 V, 3 V
  • Power: 1 x 4-pin DC power connector
  • Antennas: 4 x SMA for Mobile, 2 x RP-SMA for Wi-Fi, 1 x SMA for GNSS
  • USB: 1 x USB A port for external devices