Teltonika LTE CAT6 Router WIFI4

Technical Description

• FEATURES
  • Mobile module: 4G (LTE) – Cat 6 up to 300 Mbps, 3G – Up to 42 Mb
  • Status: Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID, Carrier aggregation
  • Multiple PDN: Possibility to use different PDNs for multiple network access and services
  • Band management: Band lock, Used band status display
  • Bridge: Direct connection (bridge) between mobile ISP and device on LAN
  • Passthrough: Router assigns its mobile WAN IP address to another device on LAN
• WIRELESS
  • Wireless mode: 802.11 b/g/n, 2x2 MIMO, Access Point (AP), Station (STA)
  • Wi-Fi security: WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation
  • SSID/ESSID: ESSID stealth mode
  • Wireless Connectivity Features: Wireless mesh (802.11s), fast roaming (802.11r), Relayd
• NETWORK
  • Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy-based routing
  • VoIP pass through support: H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
  • Firewall: Port forward, traffic rules, customs rules
  • QoS / Smart Queue Management (SQM): Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
  • Network backup: Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
  • Load balancing: Balance Internet traffic over multiple WAN connections
  • SSHFS: Possibility to mount remote file system via SSH protocol
  • ETHERNET
  • WAN: 1 x WAN port 10/100 Mbps, complies with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
  • LAN: 1 x LAN ports, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover
• SECURITY
  • Authentication: Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block
  • Firewall: Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
  • Attack prevention: DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
  • VLAN: Port and tag-based VLAN separation
  • Mobile: quota control, Mobile data limit, customizable period, start time, warning limit, phone number
• VPN
  • OpenVPN: Multiple clients and a server can run 27 encryption methods simultaneously
  • IPsec: IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
  • GRE: GRE tunnel, GRE tunnel over IPsec support
  • PPTP, L2TP: Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
  • Stunnel: Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
  • DMVPN: Method of building scalable IPsec VPNs
  • WireGuard: WireGuard VPN client and server support
  • Tinc: Tinc offers encryption, authentication and compression in its tunnels. Client and server support
• PHYSICAL INTERFACES 
  • Ethernet: 2 x RJ45 ports, 10/100 Mbps
  • I/Os: 1 x Digital Input, 1 x Digital Output on 4-pin power connector
  • Status LEDs: 2 x Mobile connection type, 3 x Mobile connection strength, 2 x Eth status, 1 x Power
  • SIM: 1 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders
  • Power: 1 x 4-pin power connector