PRODUCT SPECIFICATIONS
The POE-CONV-2AT-60 provide Gigabit PoE conversion, accepting two 802.3at inputs and providing a single 4 Pair 60W Passive PoE output which is compatible with High PoE devices like Ubiquiti airFiber.
There are two RJ45 socket for input and one RJ45 socket for the output. One input accepts Data and Power, the second input accepts only Power. The design is isolated so input and output are isolated. The devices include protections for short circuit and overload.
Note: If the inputs come from the same PoE switch then the output power is full power. If the inputs come from different PoE sources, then the output power may be ½.
Features
- Very Compact Size
- Converts two 802.3af 16W ports to one 802.3at 30W port
- Convert two 802.3at 35W ports to one 4 Pair PoE 60W port
- Allows use of standard PoE switches to power higher power devices
- I.T.E. Power Supply, UL Listed
Dimensions (LxWxH)
- 85 x 75 x 36mm (3.3 x 3 x 1.4”)
Weight
- 80g (2.8oz)
Technical Description
- Input Qty 2 802.3at Mode A or 48V Passive PoE
- Output 60W Passive PoE, 4 Pair High PoE
- Input Connector Shielded RJ45 Socket x 2
- Output Connector Shielded RJ45 Socket
- Load Regulation 5%
- Line Reg, Ripple, Noise 1%
- Ethernet Speed 10/100/1000MB, GigE, Gigabit
- LED Blinking Red: Only 1 input powering; Solid Red: Two Inputs Powering
- Solid Green: Output is active with device plugged in
- Efficiency 90% Min
- EMC Standards FCC Class B NE55022 Class B
- Isolation Voltage 1500VDC
- Isolation Resistance 100M Ohms Minimum
- Operating Temperature -30 to +60°C (-22 to +140°F)
- Operating Humidity 5% - 90% non-condensing
- Storage Temperature -40 to +85°C (-40 to +176°F)
More Information
MFRPartNum:
POE-CONV-2AT-60
Datasheet: