Welcome to our new site! We are continuously working on improving the experience. For all feedback, email feedback at Thank you for your support.


Tycon 48VDC 600W AGM Battery Charger 58.8V 10A Charger 55.2V Float. 90-240VAC 50/60Hz In. 48in DC Cable



The TP-BC48-600 battery chargers provide up to 600W of total charging power. The battery charger is compatible with GEL/AGM type sealed lead acid batteries.

The charger has various protections for reverse current, short-circuit, over-load, over-voltage, and over-current.

There is an LED which indicates charging (Red) or battery full (Green). The unit comes with a removeable AC cord with a North American Plug. The units are can work from 90VAC to 240VAC (selectable via switch).


  • 48V 600W Total Power
  • Over-Voltage, Over-Current, Reverse-Current, Over-Load, Short-Circuit Protections
  • Led indicator: Red=Charging, Green=Battery Full/Float Charge
  • CE Certification


  • Wireless Base Stations, Cellular Base Stations
  • Surveillance Systems
  • Battery Backup Systems

Dimensions (LxWxH)

  • 216 x 120 x 76mm (8.5 x 4.75 x 3”)


  • 1.95kg (4.3lb)

Technical Description

  • Total Power Available (for Load and Battery charging): 600W
  • Nominal Battery Voltage: 48VDC
  • Battery Charge Max Current: 10A
  • Battery Charger Voltage: 58.8V
  • Battery Float Voltage: 55.2V
  • Efficiency: >88%
  • DC Output Cable: 2 Wire 14AWG ; 1.2m (48”) long cable Brown = V+, Blue = VAC Input Connector IEC C14
  • AC Power Cord: IEC C13 to Nema 5-15P, 1.2m (48")
  • AC Power Input: 120VAC / 240VAC , 50/60Hz
  • Hi-Pot Test: 1500VAC / 10mA / 1min
  • Insulation Resistance: >10MOhm, 500VDC
  • Operating Temperature: -10 to +40C (14 to +104°F)
  • Operating Humidity (RH): 5% to 90% (non condensing)
  • Storage Temperature: -40 to +70°C (-40 to +158°F)
  • Storage Humidity: 5% to 95% (non-condensing)
  • Standards Compliance: CE, EN60335-1:2002 and EN60335-2-29:2002
  • MTBF (Mean Time Between Failure): >50,000 hrs

More Information