PRODUCT SPECIFICATIONS
Tycon TP-BC63-600XT 600W 63V Battery Charger
The TP-BC63-600XT battery chargers provide up to 600W of total charging power. It is specifically designed to power the PV input of an MPPT charge controller in order to charge 12V to 48V battery arrays. The MPPT charge controller handles the charging parameters of the specific batteries and the TP-BC63 supplies the power.
The charger has various protections for reverse current, short-circuit, over-load, over-voltage, and over-current.
There is an LED which indicates charging (Red) or battery full (Green). The unit comes with a removeable AC cord with a North American Plug. The units can work from 90VAC to 240VAC (selectable via switch).
Key Features
- 63V 600W Total Power
- Over-Voltage, Over-Current, Reverse-Current, Over-Load, Short-Circuit Protections
- Led indicator: Red=Charging, Green=Battery Full/Float Charge
- CE Certification
- Wireless Base Stations, Cellular Base Stations
- Surveillance Systems
- Battery Backup Systems
Technical Specification
- Total Power Available (for Load and Battery charging): 600W
- Battery Charge Max Current: 9A
- Battery Charger Voltage: 63VDC
- Efficiency: >88%
- DC Output Cable: 2 Wire 14AWG ; 0.6m (35”) long DC cable + 0.3m (12”) quick disconnect cable. XT60 connectors. Brown = V+, Blue = V
- AC Input Connector: IEC C14
- AC Power Cord: IEC C13 to Nema 5-15P, 1.2m (48')
- AC Power Input: 120VAC / 240VAC , 50/60Hz
- Hi-Pot Test: 1500VAC / 10mA / 1min
- Insulation Resistance: >10MOhm, 500VDC
- Operating Temperature: -10 to +40C (14 to +104°F)
- Operating Humidity (RH) 5% to 90% (non condensing)
- Storage Temperature: -40 to +70°C (-40 to +158°F)
- Storage Humidity: 5% to 95% (non-condensing)
- Standards Compliance: CE, EN60335-1:2002 and EN60335-2-29:2002
- MTBF (Mean Time Between Failure): >50,000 hrs
- Dimensions: (LxWxH) 216 x 120 x 76mm (8.5 x 4.75 x 3”)
- Weight: 1.95kg (4.3lb)
