Tycon Power Systems


Tycon 5 Port High Power (2A/port) PoE 10/100 Passive PoE Switch



The SW5 Series Power over Ethernet (PoE) switches offered by Tycon Power are fully automatic high speed 5 port Ethernet switches with up to 2A of PoE power per port.

TP-SSW5-NC: Universal Voltage 10/100 PoE Switch. Switch accepts universal voltage (12-57VDC) via the wire terminal connector on the back of the Switch.

This model is very compact at only 4”x5”x1.5”. 2A per port.

On the universal voltage models (“-NC”) the PoE output voltage = the input voltage so it is universal in its application. The Ethernet spec supports distances up to 100m (328 feet) between the PoE switch and the remote device.

All the Switches have DIN Rail mounts included for convenient DIN rail mounting.


  • High Power 10/100 and 1000Mb (“G”) PoE Switch
  • Remotely Power Equipment thru CAT5 Cable up to 100m
  • Up to 2A per Port
  • Built-in Surge Protection
  • Automatic MDI/MDI-X Crossover
  • Automatic Speed and Duplex Sensing
  • Compact Size
  • High Temperature Operation
  • CE and FCC Certification
  • I.T.E. Power Supply, UL Listed


  • Wireless Access Points and Client Devices
  • IP Phone and Security Camera Systems
  • PoE Lighting Applications

Dimensions (LxWxH)

  • 90 x 118 x 40mm (3.5 x 4.6 x 1.6”)


  • 182g (6.7oz)

Technical Description

  • Ethernet Standard: IEEE802.3/IEEE802.3u
  • Ports: 1 data/PoE input and 4 data/PoE, automatic crossover and polarity
  • Transmission Speed: 100 Mbps /10 Mbps Auto-negotiation
  • Switch Technology: Store and Forward
  • Protocol: CSMA/CD
  • Flow Control: IEEE802.3x(full-duplex), Back Pressure(half-duplex)
  • Data Transmission Rate: 148800pps ,14880pps
  • Address Table: 1K MAC, self-learning
  • Connections: Shielded RJ45
  • POE Output Ports: Port 1-4, auto power management Pin assignment: TX(1,2), RX(3,6), V+(4,5), V-(7,8)
  • Maximum POE Power: 2A per port
  • POE Auto Detection: Passive PoE
  • POE: Protection Over Temperature, Over Current, Over/Under Voltage
  • Data Surge: Protection ; IEC61000-4-2 (ESD) ±15kV (air), ±8kV (contact) ; IEC61000-4-4 (EFT) 40A (5/50ns) ; IEC61000-4-5 (Lightning) 20A (8/20μs)
  • LED’s: Link (Green On), Activity (Green Blinking ); PoE Detect (Yellow On), PoE Detect Error (Yellow Blinking) ; Power On (Green On), Power On Alarm (Red On)
  • DC Power Input: 12V to 57VDC, Dual DC Inputs, Reverse Polarity Protected
  • Self Consumption: < 1 Watt
  • Operating Temp: -40 to +85°C (-40 to 185°F)
  • Operating Humidity (RH): 5% - 90% (non condensing)
  • Storage Temperature: -55 to +85°C (-67 to +185°F)

More Information