The TP-SW5G Power Over Ethernet (POE) 10/100/1000Mb switch offered by Tycon Power Systems is a fully automatic high speed 5 port Ethernet switch with up to 35 Watts of POE power per port. It complies with the IEEE802.3af/at specifications for valid POE device detection.
The unit supplies power to the remote device on the unused Ethernet pins 4,5(V+) and 7,8(V-). The Ethernet spec supports distances up to 100m (328 feet) between the POE switch and the remote device.
The switch accepts DC power from the included autoranging 48-56VDC power supply or can be connected to a user supplied 48-56VDC power source. There are 2 power inputs for attachment of primary and backup power sources.
The switch also accepts POE power via the 802.3af/at uplink port.
This switch comes with a 48V 2.5A Power Supply.
- High Power 10/100 and 1000Mb (“G”) POE Switch
- Remotely Power Equipment thru CAT5 Cable up to 100m
- Up to 2A per Port
- Automatic MDI/MDI-X Crossover
- Automatic Speed and Duplex Sensing
- 1K Self Learning MAC Address Table
- Compact Size
- High Temperature Operation
- Wireless Access Points and Client Devices
- IP Phone and Security Camera Systems
- Power multiple devices from 1 data cable
- 159 x 118 x 40mm (6.3 x 4.6 x 1.6”)
- 1.2kg (2.7lb) With Supply
- Ethernet Standard: IEEE802.3/IEEE802.3u (10 /100/1000 base-T)
- Ports: 1 data only and 4 data/POE, automatic crossover and polarity
- Transmission Speed: 1000Mbps / 100 Mbps /10 Mbps Auto-negotiation
- Switch Technology: Store and Forward
- Protocol: CSMA/CD
- Flow Control: IEEE802.3x(full-duplex), Back Pressure(half-duplex)
- Data Transmission Rate: 1488000pps for 1000base-T, 148800pps for 100base-T, 14880pps for 10base-T
- Address Table: 1K MAC, self-learning
- Connections: Shielded RJ45
- Maximum POE Power: 2A per port 35W per port
- POE Auto Detection: Passive POE
- POE Protection: Over Temperature, Over Current, Over/Under Voltage
- LED’s: Link (Green On), Activity (Green Blinking );POE Detect (Yellow On), POE Detect Error (Yellow Blinking);Power On (Green On), Power On Alarm (Red On)
- DC Power Input: 48VDC (42V to 60V), Dual DC Inputs, Reverse Polarity Protected. Also Accepts POE power input on Port 5
- Self Consumption: < 8 Watts
- Operating Temp: -20 to +85°C (-4 to 185°F)
- Operating Humidity: (RH) 5% - 90% (non condensing)
- Storage Temperature: -55 to +105°C (-67 to +221°F)