Tycon 5 Port 224W High Power 1A/port Gigabit Passive PoE Switch. 12-56VDC wire term IN. VIN=VOUT



The SW5 Series Power over Ethernet (PoE) switches offered by Tycon Power are fully automatic high speed 5 port Ethernet switches with up to 2A of PoE power per port.

Universal Voltage 10/100/1000MB PoE Switch. Switch accepts universal voltage (12- 57VDC) via the wire terminal connector on the back of the switch. Also accepts 12-57VDC (1A max) Passive PoE input on port 5. 1A per port

On the universal voltage models (“-NC”) the PoE output voltage = the input voltage so it is universal in its application. The Ethernet spec supports distances up to 100m (328 feet) between the PoE switch and the remote device.


  • High Power 10/100 and 1000Mb (“G”) PoE Switch
  • Remotely Power Equipment thru CAT5 Cable up to 100m
  • Up to 2A per Port
  • Built-in Surge Protection
  • Automatic MDI/MDI-X Crossover
  • Automatic Speed and Duplex Sensing
  • Compact Size
  • High Temperature Operation
  • CE and FCC Certification
  • I.T.E. Power Supply, UL Listed


  • Wireless Access Points and Client Devices
  • IP Phone and Security Camera Systems

Dimensions (LxWxH)

  • 159 x 118 x 40mm (6.3 x 4.6 x 1.6”)


  • 318g (11oz)

Technical Description

  • Ethernet Standard: IEEE802.3/IEEE802.3u
  • Ports:
    • 1 data/PoE input
    • 4 data/PoE, automatic crossover and polarity
  • Transmission Speed: 1000Mbps / 100 Mbps /10 Mbps Auto-negotiation
  • Switch Technology: Store and Forward
  • Protocol: CSMA/CD
  • Flow Control: IEEE802.3x(full-duplex), Back Pressure(half-duplex)
  • Data Transmission Rate: 1488000pps for 1000baseT, 148800pps for 100baseT, 14880pps for 10baseT
  • Address Table: 1K MAC, self-learning
  • Connections: Shielded RJ45
  • POE Output Ports: Port 1-4, auto power management Pin assignment: TX(1,2), RX(3,6), V+(4,5), V-(7,8)
  • Maximum POE Power: 1A per port
  • POE Auto Detection: IEEE 802.3af, 802.3at
  • POE Protection: Over Temperature, Over Current, Over/Under Voltage
  • Data Surge Protection:
    • IEC61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
    • IEC61000-4-4 (EFT) 40A (5/50ns)
    • IEC61000-4-5 (Lightning) 20A (8/20μs)
  • LED’s:
    • Link (Green On)
    • Activity (Green Blinking )
    • PoE Detect (Yellow On), PoE Detect Error (Yellow Blinking)
    • Power On (Green On)
    • Power On Alarm (Red On)
  • DC Power Input:
    • 12V to 57VDC, Reverse Polarity Protected.
    • NC Accepts PoE power input on Port 5
  • Self Consumption: < 3 Watts
  • Operating Temp: 20 to +75°C (-4 to 167°F)
  • Operating Humidity (RH): 5% - 90% (non condensing)
  • Storage Temperature: -55 to +85°C (-67 to +185°F)

More Information