PRODUCT SPECIFICATIONS
The TP-SW8GBT-2SFP Power over Ethernet (PoE) 10 port Gigabit switches offered by Tycon® are fully automatic high speed Layer 2+ Ethernet manageable switches. The 10 port model has 2 GigE PoE++(90W) and 6 GigE PoE+(30W) and 2 SFP 2.5G ports. The PoE ports are manageable via the user interface.
The maximum total power for all ports is an impressive 360W. They utilize industry standard 802.3at/bt detection for fully automatic operation.
The switches require a 48VDC to 57VDC input on the dual input wire terminal connector which is capable of accepting up to 12AWG wire. The units are compatible with Category 5 or higher Ethernet cables with network distances up to 100m.
The optical range for fiber ports is up to 120Km. The RJ45 connectors are shielded and grounded to the case. The units have surge protection on all ports and are conformal coated for moisture protection. They have a wide operating temperature range for outdoor and industrial applications.
Features
- Industrial Strength (-40C to +85C Operating Temperature)
- 10/100/1000 Gigabit Compatible Ethernet and 2.5G Fiber
- Two Configurations Available:
- 4 PoE++ (802.3bt 90W) and 2 fiber (SFP) Ports
- 2 PoE++(802.3bt 90W) and 6 PoE+(802.3at) and 2 fiber (SFP) Ports
- Manageable via Console Port or IP
- Surge Protected Voltage and Ethernet Inputs, Metal Shell
- Integrated DIN Rail Mount and Wall Mounts
Applications
- Outdoor Network Installations
- Cameras and Wireless Radios
- Factory networks
- PoE Lighting Applications
Technical Description
- Ports:
- 2 Ports 802.3af/at/bt PoE++ (90W) (Port 1-2)
- 6 Ports 802.3af/at, PoE+ (30W) (Port 3-8)
- 2 SFP/LC 2.5Gigabit Fiber Ports
- 1 Console Port
- Ethernet Transmission Speed: 1000 Mbps (Gigabit) / 100 Mbps /10 Mbps Auto-negotiation
- Fiber Transceiver Compatibility 155M / 1.25G / 2.5G Multi Mode or Single Mode
- Connections: Shielded RJ45, Shielded SFP/LC, Grounded to Case
- Power Input: Vin 48VDC to 57VDC on Dual Input Wire Terminal (Max wire size 12AWG)
- Self Consumption: < 5 watts typical
- PoE Protections: Over Voltage, Over Current, Short Circuit
- PoE Pinout:
- 802.3af/at Ports = 1/2 V-3/6 V+
- 802.3bt Ports = 1/2,7/8 V- ; 3/6,4/5 V+
- Surge Protection: 6KV Normal Mode, 2KV Differential Mode
- ESD Protection: 15KV Air, 8KV Touch
- VLANS:
- Supports up to 4K VLANs simultaneously (out of 4096 VLAN IDs)
- Port-based VLAN; 802.1Q tag-based VLAN
- Ring Network Protocol: ERPS (Ethernet Ring Protection Switching)
- Link Aggregation: Static/Manual Aggregation, LACP Dynamic Convergence
- IGMP v1/v2/v3 snooping: IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 256 multicast groups
- MAC Management: Add/Delete, MAC Address learning limit, Dynamic Aging Time Setting
- Layer 3 Switching Functions: Virtual VLAN Interface, ARP, Static Router
- ACL (Access Control List):
- Based on source MAC, destination MAC, prototcol type, source IP, destination IP, L4 port number. Supports time-range time management.
- QOS (Quality of Service):
- 802.1p(COS) Classification, DSCP Classification, Source IP/Destination IP/Port Number Classification. Supports SP/WRR/DRR Scheduling Strategy and Traffic Speed Limit (CAR).
- Anti-Attack
- Support: DOS Defense ; CPU Protection, limit message send rate ; ARP Binding (IP, MAC, PORT)
- Jumbo Frame Support: 9.6K
- Switching Capacity: 26 Gbps
- Packet Forwarding Rate: 19.34Mpps
- Forwarding Mode: Store and Forward
- Package Cache: 4M
- RAM / Flash: 128MB / 16MB
- Address Table: 8K MAC, self-learning
- Network Protocols and Standards Summary:
- IEEE 802.3i 10BASET, 802.3u 100BASET, 802.3z 1000BASET
- 802.3x Flow Control
- 802.3ab Gigabit Media Independent Interface (GMII)
- 802.1q VLANs ; 802.1p (QOS)
- 802.3ad Link Aggregation Control Protocol (LACP)
- 802.3af /at /bt (PoE) ; 802.3az Energy-Saving
- IEEE G.8032 Ethernet ring protection (<50ms)
- (STP) 802.1d, (RSTP) 802.1w, (MSTP) 802.1s
- Environmental Protection: IP40
- MTBF: 100,000 hours
- Certifications: CE, FCC, RoHS
