PRODUCT SPECIFICATIONS
Tycon® offers the TP-SW8GAT/24-SFP, a high-speed Layer 2+ Ethernet switch with 10 PoE Gigabit ports. Users can configure PoE ports for 802.3AT or Passive 24V PoE, enabling diverse device powering from one switch. With two 1Gb SFP fiber ports, it accepts standard single mode or multimode fiber transceivers. The switch boasts a maximum total power of 240W and supports Cat 5 or higher Ethernet cables up to 100m, with an optical range of up to 120Km. RJ45 connectors are shielded and grounded, while surge protection and conformal coating ensure durability in varied environments. Security features like SSH ensure secure access, while L2+ capabilities enhance manageability, security, and QoS. VLAN, Port Mirroring, and more are supported, with dual power inputs for primary and backup power. Operating from -40C to +75C, it suits outdoor and industrial applications, offering ultimate flexibility for broadband and security integrators. It includes integrated DIN Rail Mount and Wall Mounts, making it ideal for outdoor networks, cameras, factory networks, and PoE lighting applications.
Technical Description
- Ports: Ports 1-8: Configurable as 802.3af/at or 24V Passive PoE, 30W Ports 9-10: SFP Fiber Transceivers Console Port (38400 Baud, 8 Bit, N parity, 1 stop bit, N flow control) Alarm Input (5-57VDC 0.5mA) Alarm Relay Output (up to 60V 3A Switching) Temperature/Humidity Probe Input
- Ethernet Transmission Speed: 1000 Mbps (Gigabit) / 100 Mbps /10 Mbps Auto-negotiation
- Fiber Transceiver Compatibility: 1G Multi Mode or Single Mode
- Connections: Shielded RJ45, Shielded SFP/LC, Grounded to Case
- Power Input: Vin 37VDC to 57VDC on Dual Input Wire Terminal (Max wire size 12AWG)
- Self Consumption: < 3 watts typical
- PoE Protections: Over Voltage, Over Current, Short Circuit
- PoE Pinout: 802.3af/at Ports = 1/2 V+ ; 3/6 V24V Passive PoE = 4/5 V+ ; 7/8 V
- Surge Protection: 6KV Normal Mode, 2KV Differential Mode
- ESD Protection: 15KV Air, 8KV Touch
- Management Methods: WEB, CLI, TELNET, SSH, SNMP
- VLANS: Supports up to 4094 active VLANs simultaneously (out of 4096 VLAN IDs); Port-based VLAN; 802.1Q tag-based VLAN; 802.1ad Q-in-Q Tunneling, Private Vlan (Protected Port), GARP/GVRP
- Port Management: PoE enable/disable, PoE Mode control, Soft Re-boot PoE Port, Total PoE Power budget control, PoE Port priority, PoE port power limitation, PD Classification Detect, PD alive check, PoE scheduling
- STP: Standard Spanning Tree (STP) 802.1d, Rapid Spanning Tree (RSTP) 802.1w Multiple Spanning Tree (MSTP) 802.1s Loop guard, TC-BPDU Guard, BPDU Guard, BPDU Filter Ring Network: Protocol ERPS (Ethernet Ring Protection Switching)
- Ring Network Protocol ERPS (Ethernet Ring Protection Switching), <20ms G.8032 ERPS Ring
- Link Aggregation: Static/Manual Aggregation, LACP Dynamic Convergence, Algorithm based on source/destination IP or MAC
- IGMP v1/v2/v3 snooping: IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 256 multicast groups, MLD snooping, Multicast VLAN
- MAC Management: Add/Delete, MAC Address learning limit, Dynamic Aging Time Setting
- Layer 3 Switching Functions: Virtual VLAN Interface, ARP, Static Router
- ACL (Access Control List): Based on source MAC, destination MAC, prototcol type, source IP, destination IP, L4 port number. Supports time-range time management.
- QOS (Quality of Service): 802.1p(COS), DSCP Classification, Source IP/Destination IP/Port Number Classification. Supports SP/WRR/DRR Scheduling Strategy and Traffic Speed Limit (CAR).
- Anti-Attack Support: DOS Defense CPU Protection, limit message send rate ARP Binding (IP, MAC, PORT)
- Other Functions: LLDP, Add/Delete Users, Log user login/operation/status/events, Port security (Dying Gasp/SNMP Trap), Device Reset, Configuration save/restore, NTP time setting, Upgrade Management.
- Jumbo Frame Support: 9216 Bytes
- Switching Capacity: 20 Gbps
- Packet Forwarding Rate: 14.88Mpps @ 64 Bytes
- Forwarding Mode: Store and Forward
- Package Cache: 4.1M
- RAM / Flash: 1GB / 128MB
- Address Table: 8K MAC, self-learning
- Operating Temp: -40 to +75°C (-40 to 167°F)
- Operating Humidity (RH): 5% - 95% (non condensing)
- Storage Temperature: -40 to +85°C (-40 to +185°F)
- MTBF: 50,000 hours
- Certifications: CE, FCC, RoHS
