Name: Ubiquiti UA-G2 Unifi Access G2 Reader (Black)
Brand: Ubiquiti
SKU: UA-G2-Black
Price: 139 USD
Availability: InStock

PRODUCT SPECIFICATIONS More Information

PRODUCT SPECIFICATIONS

Compact, second-generation NFC card reader and request-to-exit device that supports hand-wave door unlocking.

Features

Unlock using an NFC card or UniFi Identity mobile app
Additional handwave unlock functionality
Entry and exit greeting messages
Connects to UniFi Access Hub using PoE
IP55 weather resistance (-30 to 45° C)

Technical Description

Mechanical
- Dimensions: 93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4')
- Weight: 82 g (2.9 oz)
- Enclosure material: Polycarbonate, glass
- Mounting: In wall, gang box
- Weatherproofing: IP55
Hardware
- Networking interface: (1) 10/100 MbE RJ45 port
- Connectivity: BLE 4.1
- Power method:
  - PoE
  - UL 294 Power-limited Class 2 PSU
  - UL 60950-1/62368-1 LPS/PS2 PSU
- Supported voltage range: 48V DC
- Max. power consumption: 5W
- ESD/EMP protection: Air: ±15kV, contact: ±8kV
- Sensors: Proximity sensor
- Speaker: (1) 8 ohm, 0.7W
- LEDs: R/G/B/W
- Button: (1) Factory-reset
- NFC frequency: 13.56 MHz
- NFC read range: < 30 mm
- NFC standards: ISO 14443A, 14443B, 15693
- NFC technology:
  - NFC Tag 1,2,3,4,5
  - MIFARE Classic
  - MIFAREPlus
  - MIFARE Ultralight
  - MIFARE DESFire
- Operating environment: Outdoor use
- Ambient operating temperature: -30 to 45° C (-22 to 113° F)
- Ambient operating humidity: 5 to 90% noncondensing
- Software information: The software version of a product can be checked at https://unifi.ui.com
- UL 294 level:
  - Destructive attack: Level I
  - Line security: Level I
  - Endurance: Level I
  - Standby power: Level I
- UL 294 statement:
  - Compliance with IEEE 802.3 specifications was not verified as part of UL 294.
  - The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
- PoE cabling requirements:
  - Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.
  - The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm2) for patch cords; 24 AWG (0.21mm2) for horizontal or riser cable.
- CAN/ULC-60839-11-1 Grade: Grade assignment: I
- Certifications: CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
- Document number, and issue date and/or revision level: UA-G2/UA-G2-Black, V02
LED
- System:
  - Steady blue: Adopted/device is ready
  - Steady white: Pending adoption
  - Blinking white/blue: Upgrading firmware
  - Strobing red: Emergency lockdown
Software
- Management application: UniFi Access: Version 1.5.9 and later