PRODUCT SPECIFICATIONS
Ubiquiti UniFi USW-Pro-48 48-Port Gigabit Managed Switch with 10G SFP+
The Ubiquiti UniFi USW-Pro-48 provides 48 Gigabit Ethernet connections and four 10G SFP+ uplinks for business networks. It supports access and aggregation deployments that need centralized management and faster connections between switches, servers and storage.
Layer 3 capabilities include inter-VLAN routing, static routing and DHCP server functionality. Manage the switch through UniFi Network, while the integrated touchscreen provides local status information.
Key Features
- 48 RJ45 ports supporting 10/100/1000 Mbps.
- Four SFP+ ports supporting 1 or 10 Gbps.
- 176 Gbps switching capacity and 88 Gbps non-blocking throughput.
- Layer 2 switching and Layer 3 routing features.
- Fanless cooling for quiet operation.
- 1.3-inch touchscreen display.
- 1U rackmount design.
- Optional SmartPower RPS backup through the dedicated USP input.
Connectivity
Use the Gigabit RJ45 ports for wired endpoints and the SFP+ interfaces for higher-speed uplinks. Optical transceivers or direct attach cables must be selected for the intended link and equipment.
Network Management
UniFi Network brings switch configuration and monitoring into the same management environment as other adopted UniFi devices.
Power and PoE Limitations
The USW-Pro-48 uses an internal AC power supply and does not provide PoE output. Connected access points, cameras and phones that require PoE need a suitable external injector or another power source.
Ideal Applications
- Office networks with numerous wired endpoints.
- Access switching with 10G uplinks.
- VLAN-based business networks.
- Rack installations requiring quiet operation.
Compatible Products
The USW-Pro-48 supports optional redundant power through its proprietary USP Connect DC input. Use the specified SmartPower equipment and cable for this connection.
- Ubiquiti USP-RPS SmartPower Redundant Power System – officially supported backup power system for the USW-Pro-48.
- Ubiquiti USP-Cable SmartPower Cable – connects the switch's USP input to the USP-RPS.
Important: The USP connection is proprietary and must not be treated as a generic DC input. The USP cable is not included with the switch. Adding the USP-RPS does not enable PoE output.
For optical links, verify transceiver support, link speed, fiber type, wavelength, connector and distance at both ends before selecting modules.
Technical Specifications
General
- Brand: Ubiquiti
- Product Family: UniFi
- Model / MPN: USW-Pro-48
- Product Type: Layer 3 managed Ethernet switch
- Form Factor: 1U rackmount
Ethernet
- RJ45 Ports: 48
- RJ45 Speeds: 10/100/1000 Mbps
- PoE Output: Not supported
SFP+ Interfaces
- SFP+ Ports: 4
- Supported Speeds: 1/10 Gbps
Switching Performance
- Switching Capacity: 176 Gbps
- Total Non-Blocking Throughput: 88 Gbps
- Forwarding Rate: 130.944 Mpps, rounded to 131 Mpps in current online specifications
- Supported VLANs: 1,000
- MAC Address Table: 16,000 entries
Layer 2 and Layer 3 Features
- Layer 2: LACP, STP/RSTP, IGMP snooping, port mirroring and jumbo frames
- Layer 3: Local inter-VLAN routing, static routing, DHCP server and DHCP relay
Management
- Application: UniFi Network
- Published Minimum Application Version: 5.12.11
- Display: 1.3-inch touchscreen
Power
- AC Input: 100–240 V AC, 50/60 Hz
- Internal Power Supply: 60 W AC/DC
- Maximum Power Consumption: 60 W
- Backup Input: Proprietary USP RPS DC connection
- Published USP Input Rating: 11.5 V DC, 5.22 A
Physical and Environmental
- Dimensions: 442.4 × 285.4 × 43.7 mm
- Weight Without Brackets: 4 kg
- Weight With Brackets: Approximately 4.1 kg
- Enclosure: SGCC steel
- Cooling: Fanless
- Operating Temperature: -5 to 40 °C, per current online manufacturer specifications
- Operating Humidity: 10–90%, noncondensing
- Certifications: CE, FCC, IC
Included Parts
- USW-Pro-48 switch
- Power cord
- Two rackmount brackets
- Eight bracket screws
- Four mounting screws and four cage nuts
- Four rubber feet
