PRODUCT SPECIFICATIONS
D-Link DGS-1010MP 10-Port Gigabit Unmanaged PoE+ Switch
The D-Link DGS-1010MP provides Gigabit network connectivity and Power over Ethernet for small offices, retail locations and business installations. Eight PoE+ RJ45 access ports connect and power compatible IP cameras, wireless access points and VoIP phones through Ethernet cabling.
A shared 125 W PoE budget supports multiple powered devices, while separate RJ45 and SFP uplink ports provide copper and fiber connection options. Its unmanaged, plug-and-play design simplifies setup, and fanless cooling makes it suitable for occupied workspaces.
Key Features
- Eight 10/100/1000 Mbps RJ45 PoE+ access ports.
- One additional 10/100/1000 Mbps RJ45 uplink.
- One independent SFP uplink slot.
- IEEE 802.3af/at support with up to 30 W output per PoE port.
- 125 W total shared PoE budget.
- 20 Gbps switching capacity.
- Fanless design for quiet operation.
- Desktop or rack installation with a 1U-height chassis.
- IEEE 802.3az Energy Efficient Ethernet.
Connectivity and Uplinks
The switch has ten ports in total: eight PoE access ports, one copper uplink and one SFP slot. The uplinks are independent ports, allowing copper and fiber connections without sharing a combo-port interface. Fiber connections require a compatible SFP transceiver and matching cabling.
Power over Ethernet
Ports 1–8 supply standards-based PoE or PoE+ to compatible devices. The 125 W budget is shared across these ports, so the switch cannot supply 30 W to all eight simultaneously. Select devices within the per-port limit and plan for their combined maximum power requirements.
Fanless Desktop or Rack Installation
The compact chassis measures 280 x 180 x 44 mm. Use the switch on a suitable desktop surface or install it in a standard 19-inch rack with the appropriate mounting hardware. Maintain ventilation clearance even though the unit has no cooling fan.
Simple Network Expansion
No switch configuration is required for basic operation. Store-and-forward switching, copper-port auto-negotiation and Auto MDI/MDI-X support straightforward integration into an existing Ethernet network.
Ideal Applications
- Small IP surveillance installations.
- PoE-powered business wireless access points.
- VoIP phone networks.
- Office, retail and classroom network expansion.
- Installations requiring quiet operation and a fiber uplink.
Compatible Products
Connect IEEE 802.3af or IEEE 802.3at powered devices to ports 1–8. Each device must fit within the port's PoE capability, and the combined installation must remain within the shared 125 W budget.
- Ubiquiti UAP-NanoHD-US UniFi nanoHD Access Point – Supports IEEE 802.3af PoE, has a Gigabit RJ45 interface and consumes up to 10.5 W. Connect directly to a PoE access port without an inline injector.
- D-Link DAP-2610 Wireless AC1300 Wave 2 Access Point – Supports IEEE 802.3af PoE, has one Gigabit LAN port and a documented maximum power consumption of 12 W.
Important: The RJ45 uplink and SFP uplink do not provide PoE. This switch does not provide selectable 24 V passive PoE or IEEE 802.3bt PoE++. Do not directly power devices that require those technologies or exceed the supported power limits.
Fiber compatibility: Select a transceiver explicitly supported for the switch's hardware revision. Match the remote interface, fiber type, wavelength, connector and optical budget. An SFP form factor alone does not establish compatibility.
Management: Connected access points retain their own management requirements. The switch does not replace UniFi Network or D-Link's access point management platform.
Technical Specifications
General
- Brand: D-Link
- Model / MPN: DGS-1010MP
- Product Type: Unmanaged Gigabit PoE+ Ethernet switch
- Detailed Specification Reference: Hardware version A1
- Installation: Desktop or rackmount, 1U height
- Cooling: Fanless
Ethernet
- PoE Access Ports: 8 x RJ45, 10/100/1000 Mbps
- Copper Uplink: 1 x RJ45, 10/100/1000 Mbps
- Total RJ45 Ports: 9
- Copper-Port Functions: Auto-negotiation and Auto MDI/MDI-X
Fiber Interface
- SFP Slots: 1 independent uplink slot
- Documented A1 SFP Speeds: 100/1000 Mbps
- Optical Connector and Reach: Determined by the selected supported transceiver
PoE
- Standards: IEEE 802.3af and IEEE 802.3at
- PoE Ports: Ports 1–8
- Maximum Output per Port: 30 W at the switch
- Total PoE Budget: 125 W shared
Switching
- Switching Capacity: 20 Gbps
- Maximum Forwarding Rate: 14.88 Mpps
- Forwarding Method: Store-and-forward
- MAC Address Table: 4K entries
- Packet Buffer: 192 KB per the A1 datasheet
- Flow Control: IEEE 802.3x
- Energy Efficient Ethernet: IEEE 802.3az
Power
- AC Input: 100–240 V AC, 50/60 Hz
- Power Consumption, PoE Off: 7.32 W
- Power Consumption, PoE On: 133.8 W
Physical Specifications
- Dimensions: 280 x 180 x 44 mm (11.02 x 7.08 x 1.73 inches)
- Weight: 1.84 kg
Environmental
- Operating Temperature: 0 to 40°C (32 to 104°F)
- Storage Temperature: -10 to 70°C (14 to 158°F)
- Operating Humidity: 0–95% RH, noncondensing
- Storage Humidity: 0–95% RH, noncondensing
Certifications Listed in the A1 Datasheet
- EMI: CE Class A, FCC Class A, VCCI Class A, CCC Class A
- Safety: cUL, CB, CCC, LVD
Included Parts — Installation Guide Reference
- DGS-1010MP switch
- Power cord
- Power cord retainer
- Rack mounting kit and rubber feet
- Quick installation guide
