PRODUCT SPECIFICATIONS
GA10 is an easy-to-use single FXS port ATA gateway, it has with HD voice, 2 SIP accounts, advanced VoIP functionality and auto provisioning etc functions. By migrate to IP voice with the easy-to-install ATA, enable users to take advantage of VoIP on analog phones. It provides convenient, stable and cost-effective communication solutions for individual, enterprise and operator users' IP voice deployment.
- Compact and Portable
- GA10 is space-saving and portable with compact size. Compatible with Micro USB interface, users directly use computer or server for convenient-and-fast power supply.
- Simple Deployment, Easy-to-use
- GA10 supports desktop and wall-mounted installation modes. It is easy to install and saves a lot of time via simple-and-intuitive web configuration.
- Support 3-way Audio Conference
- Connected to the GA10 gateway, analog phones are able to provide 3-way HD audio conferences rather than one-to-one communication, improving meetting efficiency.
- Cost-effective, Full-scenes-matched
- GA10 can be used as local telephone extension of enterprises. Using existing analog phones, GA10 transfers analog calls to SIP calls, providing convenient and cost-effective communication solutions for individual, enterprise and operator.
Highlights
- Featuring small form factor to save space.
- Simple and intuitive Web-based configuration saves you loads of time.
- Fast single network port.
- Desktop / wall-mounted
Dimension (L×W×H)
- 85 x 68 x 22.7 mm
Technical Description
- Generic
- 2 SIP lines
- HD voice
- Desktop / wall-mounted
- Support USB port or power adapter for power supply
- Phone Functions
- Caller ID display
- Direct IP Dialing
- Anonymous call (hide caller ID)
- Call hold / resume
- Call waiting
- Call forward (Always/Busy/No Answer)
- Call Transfer (Attended/Unattended)
- Do-Not-Disturb
- Voice message waiting indication (MWI)
- Blocked list / allowed list
- 3-way conference
- Hot line
- Audio
- Narrowband codec: G.711a/u, G.726, G.729A/B, iLBC
- Wideband codec: G.722, Opus
- Acoustic Echo Canceller (AEC) Voice Activity Detection (VAD) / Comfort Noise Generation (CNG) / Noise Reduction (NR) / Automatic Gain Control (AGC)
- Packet Loss Concealment (PLC)
- Dynamic adaptive jitter buffer
- DTMF: In-band, Out-of-Band (RFC2833/ SIP INFO)
- Support the signal tone of different countries or regions
- FXS features
- Response detection
- Busy tone detection
- Incoming call detection
- Polarity detection
- Hang up detection
- Disconnect Methods: Busy Tone, Polarity Reversal
- Signalling: Kewl Start, Loop Start
- Network
- Physical: 10/100Mbps Ethernet
- IP Mode:IPv4/IPv6/IPv4&IPv6
- IP Configuration: Static IP / DHCP / PPPoE
- Firewall
- QoS
- Deployment & Management
- Auto-provisioning via FTP/TFTP/HTTP/HTTPS/DHCP OPT66/SIPPNP/TR-069
- Voice menu for basic configuration
- Web management portal
- Web-based packet dump
- Configuration export / import
- Phonebook import/export
- Backup and recovery
- Firmware upgrade
- Syslog
- Physical Specifications
- Power adapter x1
- 1.5M CAT.5E ethernet cable x1
- Reset key x1
- Status indicator light x4: power/network/SIP state/call
- FXS port x1: RJ11 x1
- Network port x1: RJ45 x1
- USB port x1: Micro USB x1 (Only power input is supported)
- DC port x1: Φ5.5x2.1x10mm
- DC power input: DC5V/1A
- Working temperature: 0~45℃
- Working humidity: 10~95%
- Installation: Desktop or Wall-mounted
- Color: black