website@flyteccomputers.com

Laird Technologies

Part:
POE-24i

Laird Technologies POE-24i 24V 0.8A PoE Power Supply and Injector

$18.95
$31.95
Condition:
New

PRODUCT SPECIFICATIONS

Laird Technologies POE-24i 24V PoE Power Supply and Injector

The Laird Technologies POE-24i combines an AC-powered supply with an Ethernet power inserter for equipment specifically approved to accept its output. It provides regulated 24V DC at up to 0.8A, equivalent to 19.2W nominal output capacity.

Separate Data IN and Data/PoE OUT connections allow power to be added to an Ethernet cable. This arrangement can simplify installation where compatible network equipment is located away from an AC outlet.

Key Features

  • Regulated 24V DC output.
  • 0.8A rated output current.
  • Auto-ranging AC input.
  • Built-in overload and short-circuit protection.
  • Ethernet surge suppression.
  • Shielded RJ45 connections.

Power and Connections

The standard POE-24i supplies positive voltage on pins 4/5 and negative voltage on pins 7/8. Connect the network source to Data IN and the approved powered equipment to Data/PoE OUT.

Compatibility Requirements

Confirm the receiving device's voltage range, polarity, power requirement and power-detection requirements before installation. Ethernet speed support must also be verified for the intended connection.

Ideal Applications

  • Approved remote network equipment installations.
  • Replacing an identical, verified POE-24i power supply.
  • Centralized power arrangements for electrically compatible equipment.

Compatible Products

Before selecting equipment, confirm all of the following:

  • Support for a 24V DC supply at the device's Ethernet power input.
  • Positive power on pins 4/5 and negative power on pins 7/8.
  • Power demand within the injector's rating, allowing for cable losses.
  • Compatible detection and startup behavior.
  • Support for the Ethernet connection speed required by the installation.

Important: Do not select this injector solely because a device is labeled 802.3af, 802.3at, PoE+ or passive 24V PoE. Confirm compatibility with the exact injector and device hardware before connecting them.

Technical Specifications

General

  • Brand: Laird Technologies
  • Model / Flytec SKU: POE-24i
  • TE Manufacturer Part Number: POE-24I
  • Product Type: AC-powered Ethernet power supply/inserter
  • Powered Outputs: 1

Power

  • AC Input: 90–264V AC, 47–63 Hz
  • DC Output: 24V DC, 0.8A
  • Nominal Output Capacity: 19.2W, calculated from rated voltage and current
  • Efficiency: 70% minimum
  • Protection: Overload, short circuit and Ethernet surge suppression

Connections and Pinout

  • AC Inlet: IEC 320 C6
  • Data Input: 1 × shielded RJ45 socket
  • Data/PoE Output: 1 × shielded RJ45 socket
  • Positive Power: Pins 4 and 5
  • Negative Power: Pins 7 and 8

Physical Specifications

  • Dimensions, L × W × H: 83 × 76 × 38 mm
  • Weight: 147 g

Environmental

  • Operating Temperature: -10°C to +60°C
  • Storage Temperature: -20°C to +85°C
  • Operating Humidity: 5% to 90%, non-condensing

Included Parts

  • POE-24i power supply/inserter
  • AC power cord; confirm supplied plug type

Download Laird / TE Connectivity POE-24i Power Supply and Injector Datasheet (PDF)

More Information

MFRPartNum:
POE-24i