Tycon Power Systems


Tycon Two 802.3af ports to one 802.3at Gigabit PoE converter. 30W



The POE-CONV-2AF-AT is a unique Gigabit PoE converter which allow a customer to use existing PoE switches to provide PoE+ functionality. They work by turning two 802.3af ports into one 802.3at port.

There are two RJ45 socket for input and one RJ45 socket for the output. One input accepts Data and Power, the second input accepts only Power. The design is isolated so input and output are isolated. The devices include protections for short circuit and overload.

Note: If the inputs come from the same PoE switch then the output power is full power. If the inputs come from different PoE sources, then the output power may be ½.


  • Very Compact Size
  • Converts two 802.3af 16W ports to one 802.3at 30W port
  • Allows use of standard PoE switches to power higher power devices
  • I.T.E. Power Supply, UL Listed

Dimensions (LxWxH)

  • 65 x 45 x 26mm (2.6 x 1.8 x 1”)


  • 62g (2.2oz)

Technical Description

  • Input Qty 2 802.3af Mode A or 48V Passive PoE
  • Output 802.3at Mode A 48V 30W, 2 Pair PoE
  • Input Connector Shielded RJ45 Socket x 2
  • Output Connector Shielded RJ45 Socket
  • Load Regulation 5%
  • Line Reg, Ripple, Noise 1%
  • Ethernet Speed 10/100/1000MB, GigE, Gigabit
  • LED Blinking Red: Only 1 input powering; Solid Red: Two Inputs Powering ; Solid Green: Output is active with device plugged in
  • Efficiency 90% Min
  • EMC Standards FCC Class B NE55022 Class B
  • Isolation Voltage 1500VDC
  • Isolation Resistance 100M Ohms Minimum
  • Operating Temperature -30 to +60°C (-22 to +140°F)
  • Operating Humidity 5% - 90% non-condensing
  • Storage Temperature -40 to +85°C (-40 to +176°F)

More Information