Ubiquiti Enterprise Access Hub (US Version)

Technical Description

• Mechanical
  • Dimensions: 379 x 355 x 105 mm (15 x 14 x 4.1")
  • Weight: Device: 9.1 kg (20 lb)
  • Mount: 624 g (1.4 lb)
  • Enclosure material: SGCC housing with PC cover
  • Mounting material: SGCC wall mount plate
• Hardware
  • Networking interface: (10) 10/100/1000 Base-T
  • Power method:
    • Universal input, 100–240V AC, Max. 4.4A, 50/60Hz
    • 32–48V DC Lead Acid Battery, Max. 7.5A @32V
  • Power supply: AC/DC, internal
  • Max. power consumption: 240W
  • PoE interface: (8) PoE (Pins 1, 2+; 3, 6-)
  • Voltage range PoE mode: 44–57V DC
  • Total available PoE: 60W
  • Max. PoE wattage per port: 15.4W
  • LEDs:
    • System: white/blue
    • Output relays: steady white
    • Ethernet: flashing white
  • Button: (1) Factory-reset
  • Digital input:
    • (8) Inputs for request-to-exit devices
    • (8) Inputs for door position sensors
    • (1) Emergency
  • Dry output relay:
    • (8) Lock terminals (12V or Dry)
    • (4) AUX terminals for advanced setup (Chime/Siren/Door opener)
  • Powered output relay:
    • Lock: 12V DC, 1A/ Dry
    • Aux: Dry only
  • Operating environment: Indoor use only
  • Ambient operating temperature: 0 to 40° C (32 to 104° F) 
  • Ambient operating humidity: 5 to 95% noncondensing
  • Software information: The software version of a product can be checked at https://unifi.ui.com
  • UL 294 level:
    • Destructive attack: Level I
    • Line security: Level I
    • Endurance: Level I
    • Standby power: Level I
  • UL 294 statement:
    • Compliance with IEEE 802.3 specifications was not verified as part of UL 294.
    • The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
  • PoE cabling requirements: 
    • Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.
    • The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm2) for patch cords; 24 AWG (0.21 mm2) for horizontal or riser cable.
  • CAN/ULC-60839-11-1 Grade: Grade assignment: I
  • Certifications: CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
  • Document number, and issue date and/or revision level: EAH-8, Ver 01
• LED
  • System:
    • Steady blue: adopted, device is ready
    • Steady white: pending adoption
    • Blinking white/blue: upgrading firmware
    • Breathing white: system initiating
• Software
  • Management application: UniFi Access: Version 1.22.17 and later