PRODUCT SPECIFICATIONS
The RPMS24-720-720 MobileSolarPro® outdoor mobile power system is designed for temporary power applications like Construction Sites, Concerts and Festivals, Emergency Power, Agriculture and other applications requiring temporary security and lighting. The rugged mobile solar trailer can support up to 160W continuous power draw with 6hrs peak sun per day.
The MobileSolarPro® comes completely assembled for quick deployment. The trailer is constructed of powder coat painted welded tubular steel instead of typical C channel bolt together trailer construction. This provides superb structural integrity and allows for completely protected and secured wiring inside the tubing. A solar cover is included for protection of panels during transport.
Features
- Low Cost Complete Mobile Solar Remote Power Solution for Off-Grid operation. Fully Assembled. Sets up in minutes.
- Weatherproof Outdoor Locking Enclosure with 720Ah High Performance Sealed Lead Acid Battery provides 2 days autonomy with <100W continuous load. Thermostatically Controlled Ventilation.
- 720W of Solar Capacity – Supports up to 160W continuous power with 6 Hrs. Peak Sun. Heavy Duty galvanized 360° adjustable solar mount.
- MPPT Temperature Compensated Solar Charge Controller: 60A Solar, 30A Load, 99% Efficiency.
- Complete Remote Monitoring and Control – Email Alerts and Manual/Automatic Reboot. Monitor Solar Voltage & Current, Battery Voltage & Current, Load Current, Temperature. Disconnect Load Power.
- Pneumatic Four Position (9ft, 12ft, 15ft, 18ft) Locking Aluminum Extension Mast for up to 110lb load. Raises fully in about 1 Minute using the integrated air pump.
- Regulated 56VDC and Un-regulated 24VDC Output at Top of Mast. Includes surge protected Gigabit 5 port PoE Layer 2 Switch with one 60W High PoE Port, three 802.3at PoE+ Ports and one 24V Passive PoE Port, all at top of pole. CAT5 connection between top of mast and battery enclosure.
- Protected and Secured Wiring.
- Dual Charging. Convenient Backup Generator or Grid Power Port. Charges batteries using solar or AC power.
- Locking 2' Ball Hitch Tongue Lock. Four spring actuated extending (30' Max) support jacks.
- Room for Second Enclosure for tool storage or additional battery capacity.
- Solar Panel Cover and Ratchet Straps for secure travel protection, Included.
- Options for adding a Tycon BreezePro® Wind Turbine Kit, a second frame mounted aluminum enclosure, a light kit, a guy line kit, a second battery bank and larger solar array.
Applications
- Construction Sites
- Surveillance Cameras
- Temporary Security
- Off Grid Power
- Temporary Remote Lighting
- Emergency Power
Total System Weight
- 1640lbs (744kg)
Technical Description
General Power Capabilities
- Continuous Power at (Hrs Peak Sun): 160W Max (6hrs), 80W Max (3hrs)
- Max Instantaneous Load: 30A Max
- Autonomy at 100W: 48hrs Typ
Batteries
- 12V Battery Capacity: 720Ah (360Ah @ 24V)
- Battery Voltage: 24VDC
- Battery Type: Maintenance Free Non-Spillable Valve Regulated Sealed Lead Acid AGM
- Battery Life: 5+years
Solar Panels
- Type Qty: 2 24VDC 360W, Polycrystalline 72 Cell Modules, 25year Life
- Array Size: 77' x 78' (1956 x 1984mm)
Solar Controller
- Type: MPPT – Temperature Compensated, 60A Solar Input, 30A Load Output
- Self Consumption: <1W
- Overcharge Protect: 32V
- Equalize Charge: 29.2V
- Bulk Charge: 28.8V
- Float Charge: 27.6V
- Over-discharge: protect 22V
- Over-discharge: recover 24V
- Remote Access: -Ethernet via TPDIN3 Monitor -WiFi connection to cloud – requires AP with internet connection
AC Charging
- Input: 110VAC, 50/60Hz, 10A
- Recharge Time: 50% discharged, 5 hrs typ
Remote Monitoring
- Type: Web Based, SNMP, 4 Channel
- Parameters Monitored: Solar Panel Volts and Current, Battery Volts and Current, Load Current, Temperature
- Controls: Connect / Disconnect Load Output, manually or automated based on programmable rules.
- Alerts: Email alerts based on programmable rules
Type Pneumatic Locking Aluminum
- Lock Positions: (4) 9', 12', 15', 18' (2.74, 3.66, 4.57, 5.49m)
- Time to full extension: 1 Minute Typ (using included integrated air pump)
- Top Mounting Area: 36' x 2.1' diameter (914 x 53mm)
Top of Mast Enclosure
- Type: Aluminum Die Cast
- Interior Size: 10 x 7.75 x 3” (254 x 197 x 76mm)
- Voltages Available: (16AWG Wire): 56VDC 5A Regulated ; 24VDC 15A Unregulated
- PoE Ports: 5 Port Layer 2 Gigabit PoE Switch ;Port 1 = 60W High PoE ; Port 2-4 = 802.3at 30W PoE+ ; Port 5 = 24VDC 12W Passive PoE
Equipment Enclosure
- Type: Vented Locking Aluminum Diamond Plate
- Internal Size: 64.5” x 17.5” x 19.5” (1638 x 444 x 495mm)
- Voltages Available Inside Enclosure: 56VDC 5A Regulated ; 24VDC 30A Un-Regulated ; 12VDC 10A Regulated