Tycon Power Systems


Tycon Mid Span. 1.8A per port. 4 port Gigabit Passive PoE UniVolt Injector, VIN=VOUT



The TP-MS4G-VHP mid span PoE power sources are used for supplying PoE and data to multiple devices from a central location such as an operations room or equipment cabinet. The PoE devices feature a separate data-in port coupled with a data out/PoE port. The PoE function is considered 4 Pair Passive PoE which is sometimes referred to as “High PoE”.

The units support Gigabit Ethernet and are backward compatible to 10/100MB. The Midspan features Universal Voltage (UniVolt) PoE outputs where the PoE voltage equals the input voltage. All ports will have the same PoE voltage. PoE DC Voltage (20V-60V) is supplied on pins 1,2 (V-), 3,6 (V+) and 4,5 (V+) and 7,8 (V-).

The unit can accept + or – voltage on input however the design is a non-isolated design. Maximum power output per port is 1.8A. The individual outputs are overcurrent, over/under voltage and short circuit protected. The midspan is DIN Rail mountable with the included DIN Rail brackets.


  • Very High Power, Gigabit 4 Port Midspan PoE Injector
  • Up to 1.8A per Individual Port
  • Universal PoE Voltage 20VDC to 60VDC.
  • Powers Passive PoE Devices using 4 pair power
  • DIN Rail Mountable – Includes DIN Rail adapters.
  • I.T.E. Power Supply, UL Listed


  • High PoE Wireless Access Points and Client Devices
  • High PoE Security Camera Systems
  • Power network devices from a central network room

Dimensions (LxWxH)

  • 90mm x 118mm x 40mm (3.5” x 4.6” x 1.5”)


  • 0.45kg (1lb)

Technical Description

  • Ethernet Standard: IEEE802.3/IEEE802.3u/IEEE802.3ab (10 base-T/100base-T/1000base-T)
  • POE Standard: Passive PoE, 4 Pair Power, High PoE
  • PoE Pinout: 1,2 (V-) 3,6 (V+) and 4,5 (V+) 7,8 (V-)
  • Shielded RJ45: Ports 4 data-in ; 4 data/PoE out, Port shield is connected to FG (frame ground)
  • Max Device Distance: 100m (328ft)
  • Maximum PoE Power: Up to 1.8A Per Port
  • POE Protection: Over Current, Over/Under Voltage, Short Circuit
  • LED’s: Green - A valid power device is detected on this port. Active current is >100mA. ; Red - No power device is detected on this port. ; Off - No input power, or input source in alarm condition. Alarm: voltage is more than 65VDC, or less than 15VDC. Alarm: current is >2A.
  • DC Power Input: 20VDC to 60VDC, Unit can accept + or – VDC on input, non-isolated design, Fused at 10A
  • Self Consumption: <1W
  • Operating Temperature: -30C to +60C (-40F to 140F)
  • Operating Humidity (RH): Up to 90% , Non Condensing
  • Storage Temperature: -40C to +85C (-40F to 185F)

More Information